Yellow Car Game By: Tammy

Here is the post that Tammy from She Wears Flowers linked up for her "audition". I thought for her first week posting here I would post this amazing tutorial. Enjoy!!!

My girls play a car game that I both love and hate. It's called "Yellow Car" and the object is to spot and count the yellow cars that you see while driving from one place to another.

The rules are pretty simple:

(1) Count all shades of yellow cars

(2) School busses don't count.

(3) When you see a yellow car you shout at the top of your lungs "YELLOW CAR. I have X number of yellow cars now!" (Just kidding! But, this is what my girls do.)

(4) Game starts over every time you get back into the car and go somewhere else.

(5) No trying to play when we aren't in the car.

We have had various scream fests discussions about whether or not certain vehicles count and if you can really count the yellow truck on our street that is ALWAYS parked in the same spot or other really-don't-matter details. In the end, the winner is the person who has the most yellow cars when we reach our destination.

This game is an easy way to distract children from those days when you run several errands and have to be in and out of the car a lot. My two-year-old loves this game, but always loses count of how many cars she has called. She usually just sticks with the number two.

I thought I would make the game a little more tactile and educational for the little people who like to play. And, it just may help my older girls to stop cheating forgetting what number they were on!

The instructions are long, but this is pretty easy!

Instructions for the Yellow Car Self-Contained Car Game:

You will need:

3  small pieces of fabric

felt

Fimo clay

six 8 inch pieces ribbon

stiff interfacing

2 sided fusible interfacing (Heat N Bond Ultra or "HnB" in the instructions)

Patterns for numbers and flap (HERE)

small square of Velcro or Velcro dot (hook and loop)

CARS: Make a set of 6 cars. I used Fimo clay which is baked. The finished product is firm, but a little flexible--not brittle at all and the colors are fantastic. I used a play-do cutter for the basic shape and tweaked it as I went along. Every car is a bit different.

You will need to cut two vertical slits in the middle of your car shape before it is baked. This is where you will weave the ribbon through the shape. Be sure the slits are tall enough to accommodate the width of your ribbon and thick enough to be able to weave the ribbon through the slits.

Follow the instructions for your clay to bake your cars and let cool completely.

A note--you can use felt, fabric, or foam for these cars, but I wanted them to be chunky so a young child with developing fine motor skills could actually grasp them and slide them along the ribbon. You can, obviously, tailor this to meet your needs.

PREPARE FABRIC: Cut two pieces of fabric  and one piece of stiff fusible interfacing 7 inches wide by 13 inches long. One piece of fabric will be the outside and one will be the inside. For the interfacing, I used a scrap from another project so I can't remember exactly what it is, but I got it at JoAnn's in the section with all of the interfacing. It is really stiff--I used it for the brim of a bonnet if that gives you an idea of how stiff it is. It probably doesn't need to be quite this stiff or thick, but I like the way it worked.

Adhere the interfacing piece to the wrong side of the fabric designated for the inside of your game.

ELLIPSE for FLAP: Placing the pattern for the large ellipse underneath the HnB, trace the pattern onto the HnB paper. Adhere the HnB to a piece of fabric that is about 7 1/4 inches by 5 1/4 inches. Cut out the ellipse and then cut it in half the long way. Peel off the paper backing. (And, yes, I forgot to line my ellipse up on my fabric--oops!)

 ELLIPSE for NUMBERS: Use the pattern to trace 6 small ellipses on HnB. Cut a piece of fabric that is slightly larger than that. Adhere HnB to fabric and cut out ellipses. Peel off paper backing. Set aside.

NUMBERS: Use the pattern to trace the numbers backwards onto the HnB. You can place your pattern underneath the HnB and hold it up to a window to be able to see the numbers through the HnB. Adhere to a small piece of felt. Cut around numbers. Set aside.

Putting it all together...

FLAP: Sew Velcro to outside on one side of the flap. I marked the center and then placed it a little below that point.

Place the fabric sides of the ellipse together (right sides together) and sew along the outside curve using a 1/2 inch seam. Do not sew the straight edge. It might be difficult to sew because the Heat N Bond tends to stick to the machine. I just added a piece of lightweight fusible (one side) interfacing to the pieces because it is soft and helps the fabric slide through better.

Snip along the curve close to the stitching being careful not cut through the stitching.

Trim seam allowance down to about 1/4 inch.

Turn the flap right side out and iron the seam smooth. The Heat N Bond will adhere the two sides together as well, so iron carefully. The Heat N Bond will make the flap a little stiffer and more durable. Then, sew the flap closed along the straight edge. Sew close to the edge. Set aside.

GAME BOARD: Use a pencil to make a mark 1/2 inch up from the bottom of the game board. Mark again every two inches starting at the first mark. You will have your starting mark and 6 more marks.

Sew your ribbons on by placing the ribbon at the marking and wrapping about 1/2 inch behind the game board. I sewed mine really carefully--going over the stitching line on the ribbon 2 or 3 times. By wrapping it around the game board, I am securing it again.
(This is upside down because I sewed the left-hand side first.)

This is what the back side will look like:

Thread the ribbon through the slits on the cars.

Sew down the right side of the ribbon. I just stretched it taut and eye-balled it to make it level, but you can mark it if you prefer. On this side, you only need to sew it down once because the number part will sew over it again and again to help hold it securely.

Iron the small ellipses to the game board at the end of the ribbon. Be sure to leave a space a little more than 1/2 inch from the edge for your seam.

Applique using a satin stitch or zigzag stitch around the small ellipses to help hold them securely. This isn't exactly my area of expertise, but it worked out okay--go slowly. Then, iron on the felt numbers in the center of the ellipses. Use a straight stitch to secure these to the ellipses. I just stitched in the middle of each number.

Sew the other half of the Velcro to the bottom of your outside fabric piece. Sew on the right side of the fabric. Make a mark 1/2 inch up from the bottom edge and sew close to the mark.

Put rights sides together and sew around three sides. The side you do not sew will be the top of the game board or the short edge that does not have the Velcro attached to it. Trim your corners. You should also trim your seam allowance to 1/4 inch after checking to make sure you have sewn it properly. I forgot to trim mine and it was fine--just a little thick.

Turn your game board right side out. Do this very slowly and carefully since it will be very stiff and it is kind of lumpy and awkward with all of those cars. Be careful you do not bend your cars or they will break! Once it is turned it will sit funny because of that stiff interfacing. Just iron the edges flat being careful not to get near the cars.

 

Fold the top edge in 1/2 inch and iron to hold it in place. Slide your flap in place being sure that it is inserted far enough to catch it completely when you sew (about 1/4 inch). The side with the Velcro should be on the same side as the cars. Sew along the edge to secure it using a 1/4 inch seam. Topstitch along the other sides in the same manner.

Sew a straight line across your game board in between the 3rd and 4th rows. You can measure to be sure it is centered. It should be 6 inches from the top and bottom. This will help your game fold over more easily.

Your game should fold over and can be held together with the Velcro. My flap is a little small (I corrected this for the pattern you are downloading) and I decided I should have added a small handle, but it works!

You are done! Here is the FRONT:

The BACK:

And, when it is put away, the SIDE:

There you go! A car game for short car rides because, let's face it, the majority of our car time is spent on frequent, short trips that we make every day.

And that's why you need the YELLOW CAR GAME in your car!